Trixbox2.8.0.4 with Openvox G400P and A400P

Hi,
If you want to add trunk on PSTN line, you can add zap trunk directly. Use the default g0.
In your situation, extra-channels.conf, you configure group=12
1) Click tab Basic->Trunk->Add Custom Trunk->Custom Dial String, fill this:
extra/g0/$OUTNUM$
2) Click tab Basic->Outbound Routes->Trunk Sequence, select:
extra/g0/$OUTNUM$
So extra/g0/$OUTNUM$ should change to your situation.

This is the output when I follow your instructions:

1) Click tab Basic->Trunk->Add Custom Trunk->Custom Dial String, fill this:
extra/g0/$OUTNUM$
2) Click tab Basic->Outbound Routes->Trunk Sequence, select:
extra/g0/$OUTNUM$

Connected to Asterisk 1.6.0.26-FONCORE-r78 currently running on trixbox1 (pid = 2964)
Verbosity is at least 3
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
== Using SIP VRTP TOS bits 136
== Using SIP VRTP CoS mark 6
-- Executing [92454598@from-internal:1] Macro("SIP/200-00000000", "user-callerid,SKIPTTL,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/200-00000000", "AMPUSER=200") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/200-00000000", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/200-00000000", "1?Set(REALCALLERIDNUM=200)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/200-00000000", "AMPUSER=200") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/200-00000000", "AMPUSERCIDNAME=Office Clerk") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/200-00000000", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/200-00000000", "AMPUSERCID=200") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/200-00000000", "CALLERID(all)="Office Clerk" <200>") in new stack
-- Executing [s@macro-user-callerid:9] ExecIf("SIP/200-00000000", "0?Set(CHANNEL(language)=)") in new stack
-- Executing [s@macro-user-callerid:10] GotoIf("SIP/200-00000000", "1?continue") in new stack
-- Goto (macro-user-callerid,s,19)
-- Executing [s@macro-user-callerid:19] NoOp("SIP/200-00000000", "Using CallerID "Office Clerk" <200>") in new stack
-- Executing [92454598@from-internal:2] Set("SIP/200-00000000", "_NODEST=") in new stack
-- Executing [92454598@from-internal:3] Macro("SIP/200-00000000", "record-enable,200,OUT,") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/200-00000000", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("SIP/200-00000000", "recordingcheck,20110105-104230,1294238550.0") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck,20110105-104230,1294238550.0: Outbound recording not enabled
-- <SIP/200-00000000>AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable:5] MacroExit("SIP/200-00000000", "") in new stack
-- Executing [92454598@from-internal:4] Macro("SIP/200-00000000", "dialout-trunk,2,2454598,,") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/200-00000000", "DIAL_TRUNK=2") in new stack
-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/200-00000000", "0?sub-pincheck,s,1") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/200-00000000", "0?disabletrunk,1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/200-00000000", "DIAL_NUMBER=2454598") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/200-00000000", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/200-00000000", "OUTBOUND_GROUP=OUT_2") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/200-00000000", "1?nomax") in new stack
-- Goto (macro-dialout-trunk,s,9)
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/200-00000000", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/200-00000000", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/200-00000000", "outbound-callerid,2") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/200-00000000", "0?Set(CALLERPRES()=)") in new stack
-- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/200-00000000", "0?Set(REALCALLERIDNUM=200)") in new stack
-- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/200-00000000", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing [s@macro-outbound-callerid:6] Set("SIP/200-00000000", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:7] Set("SIP/200-00000000", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:8] Set("SIP/200-00000000", "TRUNKOUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/200-00000000", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,12)
-- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/200-00000000", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/200-00000000", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/200-00000000", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack
-- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/200-00000000", "0?AGI(fixlocalprefix)") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("SIP/200-00000000", "OUTNUM=2454598") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/200-00000000", "custom=AMP") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/200-00000000", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))") in new stack
-- Executing [s@macro-dialout-trunk:16] Macro("SIP/200-00000000", "dialout-trunk-predial-hook,") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/200-00000000", "") in new stack
-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/200-00000000", "0?bypass,1") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/200-00000000", "1?customtrunk") in new stack
-- Goto (macro-dialout-trunk,s,21)
-- Executing [s@macro-dialout-trunk:21] Set("SIP/200-00000000", "pre_num=AMP:extra/g0/") in new stack
-- Executing [s@macro-dialout-trunk:22] Set("SIP/200-00000000", "the_num=OUTNUM") in new stack
-- Executing [s@macro-dialout-trunk:23] Set("SIP/200-00000000", "post_num=") in new stack
-- Executing [s@macro-dialout-trunk:24] GotoIf("SIP/200-00000000", "1?outnum:skipoutnum") in new stack
-- Goto (macro-dialout-trunk,s,25)
-- Executing [s@macro-dialout-trunk:25] Set("SIP/200-00000000", "the_num=2454598") in new stack
-- Executing [s@macro-dialout-trunk:26] Dial("SIP/200-00000000", "extra/g0/2454598,300,") in new stack
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s@macro-dialout-trunk:27] Goto("SIP/200-00000000", "s-CHANUNAVAIL,1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/200-00000000", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/200-00000000", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 0) - failing through to other trunks") in new stack
-- Executing [92454598@from-internal:5] Macro("SIP/200-00000000", "outisbusy,") in new stack
-- Executing [s@macro-outisbusy:1] Playback("SIP/200-00000000", "all-circuits-busy-now,noanswer") in new stack
-- <SIP/200-00000000> Playing 'all-circuits-busy-now.ulaw' (language 'en')
-- Executing [s@macro-outisbusy:2] Playback("SIP/200-00000000", "pls-try-call-later,noanswer") in new stack
-- <SIP/200-00000000> Playing 'pls-try-call-later.ulaw' (language 'en')
-- Executing [s@macro-outisbusy:3] Macro("SIP/200-00000000", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/200-00000000", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,4)
-- Executing [s@macro-hangupcall:4] GotoIf("SIP/200-00000000", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,7)
-- Executing [s@macro-hangupcall:7] GotoIf("SIP/200-00000000", "1?theend") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] Hangup("SIP/200-00000000", "") in new stack
== Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/200-00000000' in macro 'hangupcall'
== Spawn extension (macro-outisbusy, s, 3) exited non-zero on 'SIP/200-00000000' in macro 'outisbusy'
== Spawn extension (from-internal, 92454598, 5) exited non-zero on 'SIP/200-00000000'
-- Executing [h@from-internal:1] Macro("SIP/200-00000000", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/200-00000000", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,4)
-- Executing [s@macro-hangupcall:4] GotoIf("SIP/200-00000000", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,7)
-- Executing [s@macro-hangupcall:7] GotoIf("SIP/200-00000000", "1?theend") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] Hangup("SIP/200-00000000", "") in new stack
== Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/200-00000000' in macro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/200-00000000'
trixbox1*CLI>


chan_extra.conf
;
; DAHDI telephony
;
; Configuration file
;

[trunkgroups]


[channels]

language=en
context=from-gsm

usecallerid=yes
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
group=1
callgroup=1
pickupgroup=1

#include extra-channels.conf

chan_dahdi.conf

;
; DAHDI telephony
;
; Configuration file

[trunkgroups]

[channels]

language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
;echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no

;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no

;Include setup-pstn configs
#include dahdi-channels.conf

group=1

;Include PBXconfig configs
#include chan_dahdi_additional.conf

Is it ok that both have group 0? Is there any document that has good explanation of the conf filkes in asterisk?

Temporary Solution.

1. added to bottom of /etc/asterisk/extensions_custom.conf
[from-gsm]
exten => s,1,Answer()
exten => s,n,Goto(ext-group,600,1)
exten => s,n,Hangup

2. added trunks
extra/5/$OUTNUM$
extra/7/$OUTNUM$
extra/g0/$OUTNUM$ did not work. I also tried g12, g13, g63 with no luck.

3. Added another SIM/GSM card from a different provider. The SIMs used to test which are the ones I have to use in production did not work. I will call the provider tomorrow and hope all works as their rates are great.

If all works well I will be back to mark this post as SOLVED.

Hi,
If you add inbound on webpage, you don't need to write dialplan in extensions.conf. If possible, please give me ssh to check. My Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
If there is result, please let us know.

ssh not possible. I do not have static ip and have to go through adsl modem and router and will not be able to setup soon. How do I change the tones for the G400P? I believe that the Digicel SIMs that are giving the problem might be 'uk' and the default I have setup is 'us'. Is it possible to change the tone pattern per slot on the G400P? When I try to dial out I get "all circuits are busy now" and when dial in I get "the number you have dialed is unavailable". If I change the SIM it works. All SIMs work in the phones.

Hi,
1) You can change country mode to UK following these steps:
In /etc/asterisk/indications.conf, country=uk
Load driver using this command: modprobe opvxg4xx opermode=United Kingdom
2) SIM cards on G400P can't set to different country mode.
If any problem , you can add my G talk: This email address is being protected from spambots. You need JavaScript enabled to view it. or MSN: This email address is being protected from spambots. You need JavaScript enabled to view it.